We couldn't find anything for that search.

Contact our support team
  • POS
  • Pay
  • Reservation
  • Order
  • Website
  • English (UK)
    DE German
    NL Dutch
    FR French
    IT Italian
    GB English (UK)
    ES Spanish
  • Log in
  • Updates
  • POS
  • Pay
  • Reservation
  • Order
  • Website
  • English (UK)
    CS Czech
    PL Polish
    DE German
    PT Portuguese
    HR Croatian
    NL Dutch
    FR French
    HU Hungarian
    SK Slovak
    IT Italian
    GB English (UK)
    RO Romanian
    ES Spanish
  • Log in
  • Home
  • Digital POS System
  • Comprehensive guide
  • Configure your POS
  • Old BackOffice
  • General

Printers: How to add printers and connect a buzzer

Table of Contents

What do you need to know? Part 1: Add a printer 1. Open General 2. Go to Printers 3. Click + Add printer 4. Enter a name 5. Enter the logical name 6. Select the driver 7. Enter the network address 8. Choose what the printer does 9. Save the printer Part 2: Edit or delete a printer 1. Edit a printer 2. Delete a printer 3. Confirm the deletion Part 3: Connect a buzzer 1. Edit the printer 2. Open the Driver drop-down menu 3. Select EPSON TMT-88 GROOT 4. Save the printer Save and send your changes Good to know

Printers print the receipts for your guests and the production tickets for your kitchen and bar. In this article you add a printer in the Backoffice, change or delete a printer, and connect a buzzer that beeps every time a new order is printed.

What do you need to know?

You manage your printers in the Backoffice under General > Printers. The POS finds each printer through its network address, and the driver tells it how to print. When you add or change a printer, you see these settings:

ImportantYour printers are usually set up by DISH during installation. A wrong setting can stop receipts or production tickets from printing. If you are not sure, contact the DISH POS service desk before you change anything.
What you see What it means What to do
Name The name of the printer in the Backoffice, for example Kitchen printer. Enter a name you recognise easily.
Logical name The name the system uses for the printer. Enter it in capital letters without spaces, for example KITCHENPRINTER.
Driver The printer model and the way it prints. Choose the driver of your printer. For a buzzer, see Part 3.
Network address The IP address of the printer in your network. Enter the IP address followed by :9100, for example 192.168.0.11:9100.
Ticket printer The printer prints receipts. Tick it for the printer at your till.
Is coop printer, Connected customer display, Print move ticket, Only generate ESCPOS code Settings for special setups. Leave them unticked, unless the service desk tells you otherwise.
Alternative printer in case of error A second printer that takes over if this printer is not available. Optional. Choose another printer.
Duplicate printer A printer that prints a copy of every ticket. Optional. Choose another printer.
Logo filename The file name of a logo for the printout. Leave it empty, unless the service desk has set up a logo for you.

Part 1: Add a printer

Follow these steps to add a new printer, for example for a new terrace bar.

1. Open General

In the Backoffice menu, click General.

General in the left menu of the Backoffice.
General in the left menu of the Backoffice.

2. Go to Printers

In the submenu, click Printers.

Printers in the General submenu.
Printers in the General submenu.

3. Click + Add printer

You now see the overview of your printers with their logical name, driver and network address. Click + Add printer in the top right corner. A new window opens.

The overview of your printers with the + Add printer button.
The overview of your printers with the + Add printer button.

4. Enter a name

Enter a Name for the printer.

The Name field of the new printer.
The Name field of the new printer.

5. Enter the logical name

Enter the Logical name in capital letters and without spaces, for example PRINTERTERRACE.

The Logical name field.
The Logical name field.

6. Select the driver

Open the Driver drop-down menu and select the driver of your printer.

The Driver drop-down menu.
The Driver drop-down menu.

7. Enter the network address

Enter the IP address of the printer in Network address, followed by :9100. For example: 192.168.0.11:9100.

The Network address field.
The Network address field.

8. Choose what the printer does

Tick one or more options. For the printer at your till, always tick Ticket printer. Leave the other options unticked, unless the service desk tells you otherwise.

Ticket printer is ticked for a printer that prints receipts.
Ticket printer is ticked for a printer that prints receipts.

9. Save the printer

Click Save in the bottom right corner. Use Save and add new if you want to add another printer straight away.

The Save button at the bottom right of the window.
The Save button at the bottom right of the window.

Part 2: Edit or delete a printer

Open General > Printers first, as shown in Part 1, steps 1 and 2.

1. Edit a printer

Click the pencil icon next to the printer you want to change. Change the settings and click Save.

The pencil icon opens the settings of the printer.
The pencil icon opens the settings of the printer.

2. Delete a printer

Click the bin icon next to the printer you want to delete.

The bin icon next to a printer.
The bin icon next to a printer.

3. Confirm the deletion

Click Delete to confirm.

Confirm with Delete.
Confirm with Delete.

ImportantA deleted printer cannot be restored. Before you delete a printer, make sure that no production station still prints on it.

Part 3: Connect a buzzer

A buzzer, also called a zoomer, is a small device that beeps every time a new order is printed. It helps staff notice new orders on a kitchen or bar printer in a busy or noisy area. After the buzzer is plugged into the printer, you choose a driver that sends a signal to it.

An external buzzer. It connects to the RJ-11 port of the printer.
An external buzzer. It connects to the RJ-11 port of the printer.

Before you startA printer has only one RJ-11 port. You can connect either a cash drawer or a buzzer to it, not both. That is why a buzzer cannot be used on a receipt printer that already has a cash drawer.

1. Edit the printer

Go to General > Printers and click the pencil icon next to the printer the buzzer is connected to.

The pencil icon of the printer with the buzzer.
The pencil icon of the printer with the buzzer.

2. Open the Driver drop-down menu

In the settings of the printer, open the Driver drop-down menu.

The Driver drop-down menu of the printer.
The Driver drop-down menu of the printer.

3. Select EPSON TMT-88 GROOT

Select EPSON TMT-88 GROOT. With this driver, the printer sends a signal to the buzzer with every ticket.

Select EPSON TMT-88 GROOT for a printer with a buzzer.
Select EPSON TMT-88 GROOT for a printer with a buzzer.

Driver What happens When to use it
EPSON TMT-88 GROOT The printer sends a signal with every ticket. A connected buzzer beeps. A connected cash drawer opens. For a kitchen or bar printer with a buzzer.
EPSON TMT-88 GROOT zonder beeper The printer sends no signal. "Zonder beeper" is Dutch for "without beeper". For a printer without a buzzer, or for a kitchen printer that is also your receipt printer. This way the cash drawer does not open with every production ticket.

4. Save the printer

Click Save in the bottom right corner.

The Save button of the printer.
The Save button of the printer.

Save and send your changes

Changes to your printers only reach your POS after you send them. Click Save in the bottom right corner. Then send your changes to your POS via General > General > Send. Read more in Sending changes from Backoffice to POS.

General in the General submenu.
General in the General submenu.

The Send button sends your changes to the POS.
The Send button sends your changes to the POS.

Good to know

  • Ask before you change. Printers are set up during installation. If a printer stops printing after a change, contact the DISH POS service desk.
  • Use the right address format. Enter the IP address followed by :9100, for example 192.168.0.11:9100.
  • Keep logical names simple. Use capital letters without spaces, for example BARPRINTER.
  • One port, one device. A printer can have a cash drawer or a buzzer, not both.
  • "Zonder beeper" means without buzzer. Choose this driver when a printer should not send a signal, for example when it also opens your cash drawer.
  • Send your changes. New or changed printers only work on your POS after you send the changes.
  • Check the result. After you send the changes, place a test order. Check that the ticket prints on the right printer and that the buzzer beeps.
unnamed unspecified

Was this article helpful?

Yes
No
Give us feedback about this article

Contact Us

If you still have questions or prefer to get help directly from an agent, please submit a request. We'll get back to you as soon as possible.

Please fill out the contact form below and we will reply as soon as possible.

Related Articles

  • Languages & Translations: Offer Your Menu in Multiple Languages
  • Facilities : How to set up your table plan
  • User Groups: How to manage your staff's access
  • General- Sending changes from Backoffice to POS
Logo DISH
Want to learn more
about our solutions?
Book a demo
App Store
Google Play Store
  • About
  • Contact
  • Sitemap
  • Careers
  • Home
© Copyright dish.co 2025
  • Imprint
  • Terms of Use
  • Privacy Policy
  • Cooperation Partner
  • Privacy Settings
Expand